made first gun today. made snow for first time in atlanta. used water spickit and air comp. with small gun. what can i do with either paint tips or pressure washer tips, first gun was drilled cap

The next step would be a combo/Sm4 gun (just so you don't get confused they are the same.) Just search around the the combo forum and read the guide to the SM4 that is at the top. These are the guns that use the pressure washer nozzles as you mentioned. You do, however, need a pressure washer to run this gun. The "paint tips" are still in the experimental phase. The guys working on making the spray paint tip guns are trying to make a combo type gun without a pressure washer. Use the find tool and do some research.

On a side not, living in Atlanta you must have marginal snowmaking temps all the time. Being such, tee guns are the easiest gun to make snow with in marginal temps, combos need it to be a little bit colder (Wet bulb less than 28). And from what of been reading on the spray paint guns, they need even colder temps.

thanks for the advice