Madly Oscillating Moderator!

|
Welcome. Start Here: How to Build A Tee GunPlease note in order to make snow you need freezing temps (generally 26-28 degrees depending upon the humidity) and an air compressor.
|
| |
| Posts: 2262 | State/Prov and Country: Madison, WI | Registered: December 02, 2003 |  
IP
|
|
Snowmaking Junkie
|
quote: Originally posted by Chris Sanderson: Could I use a pressure washer in the place of the hose?
I think you mean to ask if you could use a pressure washer for a water source instead of household water.... And if you're wanting to do that with just a teegun, then NO! Pressure washers are used when building SM4's/Combo's. Master that teegun first, then start checking out the top posts in the Advanced section.
|
| |
| Posts: 148 | State/Prov and Country: GA | Registered: February 07, 2006 |  
IP
|
|
Newbie
|
quote: Originally posted by Chris Sanderson: I have a h HP Air Compressor. Its a 13 gal 6.5 cfm @ 40 psi.
I missed spell. It is a 5 HP
|
| |
| Posts: 6 | State/Prov and Country: NC | Registered: December 16, 2008 |  
IP
|
|
Fat Cap Fan Plus Pro Snow Maker

|
wow... 6.5 cfm is awful low for a 5 hp compressor... is it a gas powered compressor? Most 5 hp compressors I've seen run in the 12-18 cfm range. The difference between a combo and a tee is that a combo gun has extra nozzles above the teegun (nuc nozzle, in this case) powered by a high pressure pump such as a pressure washer.
_____________________________________________________________ Cowboy Snowmaker
|
| |
| Posts: 2777 | State/Prov and Country: Mt Brighton, MI | Registered: August 12, 2008 |  
IP
|
|
Madly Oscillating Moderator!

|
quote: Originally posted by anickode: wow... 6.5 cfm is awful low for a 5 hp compressor... is it a gas powered compressor? Most 5 hp compressors I've seen run in the 12-18 cfm range.
Must be an older compressor made when manufacturers were allowed to lie and list "Peak HP".
|
| |
| Posts: 2262 | State/Prov and Country: Madison, WI | Registered: December 02, 2003 |  
IP
|
|