Hello from Huntersville North Carolina,

I recently built a combo Gun out of 3/8 Brass. I have a 135PSI 6Hp 25gal 8.3 SCFM @ 40PSI, 5.8 SCFM @ 90 PSI compressor, and a 3000 Max PSI 2.8 Max GPM Preasure washer. THe gun is built but I have no idea which nozzels to begin with. Any suggestions?

thanks

Greg

I'm new to snowmaking but i made a combo with 4002 bulks and 4003 nuc. worked great!! Have similar set up as far as pressure washer and compressor.

a 4002 and a 4003 for your two bulk should work.. you could order two 4003's too. for your nuc i would go with a 5606 nuc nozzle.

6506, maybe?

quote:

Originally posted by z10s26:
a 4002 and a 4003 for your two bulk should work.. you could order two 4003's too. for your nuc i would go with a 6506 nuc nozzle.

EDIT: yeah, fixed that... thanks for the pickup tony

go with a 8006 for the nuc! you'll never get wet edges that way. the 80degree works better for the 40deg bulks. 65deg will most likely leave wet edges, especially with a lil wind.